Skip to content

Greases

PRODUCT THICKENER APPLICATIONS SPECIFIC ADVANTAGES NLGI GRADE OPERATING TEMPERATURE RANGE BO VISCOSITY*
MULTIS 2 Li / Ca • Multipurpose grease for general lubrication. Compatible with most conventional soaps. 2 -25 °C to +120 °C 120
MULTIS 3 Li / Ca 3 -20 °C to +120 °C 120
MULTIS EP 00 Li / Ca • Grease for centralized lubrication system and gears. Extended life of the parts due to the good resistance of the lubricating film. 00 -30 °C to +100 °C 150
MULTIS EP 0 Li / Ca 0 -30 °C to +100 °C 150
MULTIS EP 1 Li / Ca • Multipurpose grease for lubrication of all applications under load. Enables to rationalize stocks and simplify maintenance operations. 1 -30 °C to +100 °C 150
MULTIS EP 2 Li / Ca 2 -25 °C to +100 °C 150
MULTIS EP 3 Li / Ca 3 -20 °C to +100 °C 150
MULTIS COMPLEX EP 2 Li complex • Extreme pressure multipurpose greases, high speeds. • For wheel bearings, ball bearings, roller bearings, plain bearings, seals… Enable inventory rationalization and simplify maintenance operations. Very good mechanical and thermal stability. 2 -20 °C to +160 °C 165
MULTIS COMPLEX EP 3 Li complex 3 -20 °C to +160 °C 165
MULTIS COMPLEX HV 2 Li complex • Extreme pressure multipurpose grease for loaded applications and high speeds. • For wheel bearings, ball bearings, roller bearings, plain bearings, seals… 2 -30 °C to +160 °C 340
MULTIS COMPLEX XHV2 MOLY Li complex / MoS • Extreme pressure grease containing 3% MoS . • Specially recommended for extreme loads and high temperatures in the mining industry Excellent resistance to loads and shocks. Very good resistance to water, tem- perature changes and pollutions. Lengthening of lubrication intervals. 2 -20 °C to +160 °C 800
MULTIS COMPLEX SHD 220 Li complex • Very high-performance PAO synthetic grease, over a wide range of temperatures and heavy loads. • Recommended in papermaking: felt rolls… Low traction coefficient conducive to energy gains and an increase in the service life of the bearings. Operates at low temperatures. “NEW GENERATION” calcium sulfonate complex grease. Excellent water resistance. Enhanced anti-corrosion properties. Allows high speed applications. 2 -40 °C to +160 °C 220
CERAN XM 100 Complex Ca sulfonate • Multipurpose, extreme-pressure, water-resistant grease. • Recommended in the paper industry for high speeds. • Heavy duty and off-road applications in civil enginee- ring and industry. 1/2 -30 °C to +180 °C 100
CERAN XM 220 Complex Ca sulfonate • Multipurpose, extreme-pressure, water-resistant grease.
• Suitable for the lubrication of continuous castings and rolling mills in steel plants, bearings in wet and dry (felt rolls) sections of paper mills.
• Severe industrial applications (heavy loads, dust, water, high temperatures, etc.)
“NEW GENERATION” calcium sulfonate complex grease. Excellent water resistance. Enhanced anti-corrosion properties. Enables inventory rationalization. 1/2 -30 °C to +180 °C 220
CERAN XM 460 Complex Ca sulfonate • Multipurpose, extreme-pressure, water-resistant grease.
• Shock loaded applications in industry even in severely demanding environment (water, dust, high temperature).
• Suitable for the lubrication of bearings in steel plants, in paper industry, for the lubrication of hard wood gra- nular presses and in all industrial applications under severe conditions.
“NEW GENERATION” calcium sulfonate complex grease. Excellent water resistance. Enhanced anti-corrosion properties. 1/2 -25 °C to +180 °C 460
CERAN AD PLUS Complex Ca sulfonate • Highly adhesive, extreme pressure grease adapted to severe conditions.
• For metal cables, rails, winches, capstans, open gears and chains.
• Recommended in cement plants, mines, quarries, offshore.
No loss of significant consistency on contact with water. 0/1 -20 °C to +150 °C > 1700
CERAN MS Complex Ca sulfonate / MoS • Extreme pressure multipurpose grease adapted to very heavy loads and very high temperatures, subject to shock loading and vibration. Solid additives enabling a significant extension of the service life of the parts. 1 / 2 -20 °C to + 180 °C 650
ALTIS EM 2 Polyurea • Grease for high temperatures and high speeds.
• Typically used in electric engine bearings.
Reduction of the vibration level. Allows long re-lubrication intervals. 2 -40 °C to + 180 °C 110
ALTIS SH 2 Polyurea • Very high-performance synthetic grease for a wide range of temperatures.
• Specially developed for 1st fill applications as part of lifelong lubrication.
Reduction of the vibration level. Energy gains. Allows to reach high speeds over a wide temperature interval. 2 -20 °C to +180 °C 80
BIOMULTIS EP 2 Li • Biodegradable, multi-purpose, extreme pressure grease.
• Recommended for severe applications.
Very good resistance to water washout. Ultimate biodegradability (> 60%) according to OECD 301-B. EAL Grease (Environmentally Acceptable Lubricants). 2 30 °C to +140 °C 150
COPAL OGL 0 Complex Al / MoS / Graphite • Highly adhesive extreme pressure grease, for heavy loads and high temperatures.
• Applications in cement plants: open gears of kilns and mill drives.
• Applications in sugar mills: open gears in sugar cane mills.
Excellent adhesiveness on metal surfaces. Dual solid additivation, decreasing friction coefficient, limitating wear particularly near the tooth crest and tooth base, decreasing energy consumption. Very good resistance to water. 0/00 -20 °C to +150 °C > 1000
COPAL OGL 2 Complex Al / MoS / Graphite • Highly adhesive extreme pressure grease, for heavy loads and high temperatures.
• Specially developed for lubrication of open gears when a NLGI 2 grade is required.
2 -15 °C to +150 °C > 1000
COPAL SPRAY Complex Al / Graphite • Grease loaded with solid lubricants.
• For joints, open gears and cables.
Enables local application of all surfaces. 1 -30 °C to +120 °C -
NEVASTANE XMF 00 Complex AI • Multipurpose greases adapted to high and medium speeds in the agrifood industry.
• For centralised lubrication, bottling equipment, and plain bearings.
Extended life of the equipment. Excellent protection against corrosion. Resistance to water. NSF H1• Kosher • Halal ISO 21469 0 -20 °C to +150 °C 105
NEVASTANE XMF 0 0
NEVASTANE XMF 1 1
NEVASTANE XMF 2 2
NEVASTANE XS 80 Complex Ca sulfonate • Full synthetic, extreme-pressure, high per- formance grease.
• Suitable for high speeds applications, heavy loads with very wide temperature range required.
• Recommended for pelleting machines.
Suitable for very low temperatures. Excellent water resistance. Reduces grease consumption (long life grease). NSF H1 ISO 21469 1/2 -55 °C to +180 °C 80
NEVASTANE XS 320 Complex Ca sulfonate • Full synthetic, extreme-pressure, high performance grease.
• Suitable for low and medium speeds applications.
• Good lubrication properties under severe conditions and high loads.
• Recommended for pelleting machines.
Suitable for very low temperatures. Excellent water resistance. Reduces grease consumption (long life grease). NSF H1 ISO 21469 1/2 -40 °C to +180 °C 320